Our products

Right handed rotation for use when contra rotating props are required. A 50mm 3 blade right hand rotation prop.

OCTURA electric motor coupling for an 8mm plain motor shaft to 3/16 cable"

14" Flexi shaft with 3.8mm (.150") right hand lay cable into 2.5" x 4mm s/s stub shaft. Uses Octura high quality cable

SPEEDMASTER S/s 3 part coupling 8mm plain to 3/16"

Front housing steel spacing bush

CMB 90/91 header retaining spring

OCTURA 1/4"-28unf. (.250") threaded hardened plated steel motor collet coupling, connecting to .130" flexi cable.

Small cast strut blade with skeg with 3/16 bearings. Ideal for electrics and motors up to .18. Could also be used for 3.5cc motors. Nose piece takes the .150" teflon tubing."

SPECIAL OFFER
£22.95

NSP £28.95.  Prather P265 stainless steel prop

 An Ideal prop for surface and semi surface drive 10cc - 11cc monos and cats.

OCTURA 8mm plain shaft coupling with 2 grub screws to connect to 1/4" cable

This 15" flexi shaft is made using OCTURA .150" flexi cable silver soldered into a Stainless steel 3/16" stub shaft, which is turned down to 1/8" for use in a strut with 3/16" bearings, enabling the small OCTURA 1/8" bore props (27 to 35mm) to be used. We make the shafts to your required length. The shaft can also be fitted with .130" flexi cable if required.
Ideal for the OMRA "Z" class and fast Electrics where the small OCTURA props are required."

Small stainless steel rudder to fix behind prop.
Fits behind small stainless steel strudder unit. see struts

SPEEDMASTER  S/s. 3 part electric motor coupling for 8mm plain shaft to 1/4" flexi cable

Flywheel cone

OCTURA  strut suitable for fast electrics, Z" class and motors up to .45. Cast in BeCu with 3/16" sleave bearings fitted. A brass nose piece to take .130 or .150" teflon can be fitted if required. extra £1.50

OCFH1415 1/4"-28unf. threaded hardened plated steel, two part coupling for connecting to .150 (3.6mm) flexible cable

Silicon Bronze prop. Suitable prop on surface drive 26cc Monos. Comparable to Octura X467

22mm I.D. cooling ring to give extra cooling to the aluminum manifold, complete with brass water nipples and sealing O rings.



Ideal for all 22mm Headers,

Ideal prop for 11cc surface drive hulls

A 15" (380mm) O.A.L. flexi shaft using .150" right hand cable into a 2.25"  (56mm) x 3/16" stub shaft which has a 4mm thread.

Uses Octura high quality cable Standard shaft is 15"  (380mm) in length including 2.25" stub.
State shaft lengths when ordering if different from our standard length 

Small all stainless steel transom mounted rudder & brackets suitable for Electrics and small ic. boats

Aeromarine Aerial assembly. Reciever aerial feeds up through a nylon tube

OCTURA 1/4"unf threaded coupling to connect 3/16 cable

OCTURA OCFHE1413 Two part twin grub screw, hardened plated steel 1/4" smooth shaft coupling connecting to .130"  (3.2mm) flexi cable.

Stainless steel prop. Suitable for the 23 - 26cc Zenoah type engines. Comparable to Octura X467

15cc S/steel tuned pipe with water cooling and pressure pipe fitted

 Ideal prop for 11cc surface drive monos on high nitro, and riggers and cats not needing high lift.

A 15" (overall length 380mm) flexi shaft using .150" (3.8mm) OCTURA flexi cable into a stainless steel 3/16" x 2.25" (64mm) stub.   Longer or shorter stubs can be fitted if required, please state when ordering also the length of cable.

Standard shaft is 15"  (380mm) in length including 2.25" stub.
State shaft lengths when ordering if different from our standard length