Our products

OCTURA OCFH1425 with spigot, case hardened flex coupling for engine shaft 1/4unf to 1/4" cable.

OCTURA 1/4" plain shaft to .150"  (3.8mm) cable

Prather silicon bronze prop. Ideal for 26cc surface drive monos. Equivalent to OCTURA X472

BHHanson Zenoah modified quick release mount with integral bracket complete with throttle linkage

Water pump for petrol engines fitted with a clutch. Ensures water cooling at all times

Wedge rudder for surface drive fast electrics or .12 to .18 engines. Built in waterscoop, highly polished CNC machined aluminium. Small rudder with 95mm long rudder blade, leading edge 42mm from the transom

15" Flexi Shaft with .150" (3.8mm) into  2.5" x 3/16"   Stub shaft with 4mm thread.
Longer or shorter lengths can also be supplied. State when ordering. Uses Octura high quality cable

14" Flexi shaft .150" cable into 5mm x 2.5" long stub shaft. Shafts can be made longer or shorter if required.

A must for your radio box battery.
Dont loose control, keep a check on the battery state. Battery checker switchable for 4.8v/6v battery packs.

CMB 45Rs & Evo Disc valve

A small lightweight wedge rudder, ideal for Electric & I.C. mono, cat and hydro hulls. The wedge blade measures 4 in length and incorporates an integral water pick up. Comes with mounting bolts etc. leading blade edge stands just 42mm from transom."

OCTURA 5/16"unf.  threaded coupling to 3/16" flexi cable

OCTURA hardened plated steel 3/16" smooth output shaft electric motor coupling to .130" flexi cable

 

Modified carb Iso block for use with a water pump with pressure nipple fitted  correctly.

15" Flexi shaft .150" into 2.25" x 4mm stub. Uses Octura high quality cable

Built in waterscoop, highly polished CNC machined aluminium. Medium rudder assembly with 130mm (5") long rudder blade and 76mm transom to front of rudder blade.

OCTURA hardened plated steel coupling threaded 5/16"unf to 1/4" cable

OCTURA 3/16" smooth output shaft, hardened plated steel collet coupling connecting to .150" (3.6mm) flexi cable.

No stock. Comparable prop to the Octura X482

Stainless steel WTC 22mm Header.
Allows the exhaust to be brought to the centre of the boat

Zenoah water pump complete with piping and Iso Block. A must for engines fitted with a clutch but can be used without a clutch being fitted. Water is being circulated at all speeds.

Needs to have the modified carb Isolation block with a pressure nipple fitted

CS62 NO LEAK exhaust flange. CNC aluminium watercooled flange that does not allow the possibility of a water leak into the exhaust gas and is machined so that the viton o-rings stay in position. Fits most 22mm 7/8" header pipes and includes one set of viton o-rings..

X457/3 BeCu propeller siutable for surface & semi surface drive boats using .90 to . 101 size engines. with 3/16 bore"

Nylon cable tie wraps (small)

Auto bailer that can be taken apart for cleaning

OCTURA OCFHO6518 two part hardened 6mm threaded coupling with spigot to 3/16" cable, fits OPS 65/80 engines and engines with 6mm crankshafts.