Our products

.250" (1/4") Teflon tubing per inch, (25mm) To be used with 1/4" cable. Fits 11/32" K&S brass tubing
When using teflon in a metal prop tube, grease should not be used to lubricate the cable, the best lubricant is car engine oil such as 20/50.

OCFHE5MM18 Two piece heavy duty twin grub screw hardened plated steel coupling for coupling a 5mm plain shaft to 3/16 (.187") flexi cable."

14" oal. Flexi shaft using Octura .130" (3.2mm)  right hand lay cable into a 4mm stub.
Please specify if a different length stub is required from the 2.5" one.

Standard shaft is 14"  (360mm) in length including 2.5" stub.
State shaft lengths when ordering if different from our standard length 

Black non kink 4mm bore thick walled silicon tubing, 8mm OD

Futaba HD switch harness with plug retaining clip and charge lead

MMS S/s. electic motor coupling 5mm plain to 3/16"

medium sized brass sport/scale rudder.

H.50mm  x  W. 40mm x Tapered to 29mm

 Brass rudder for underhull operation. complete with rudder tube and tiller arm

TO CLEAR £50.98 Front housing for the 45Rs.

OCFH5MM13 5mm threaded coupling to .130"  flexi cable for use with the small .12 - .18 glow engines.

 

SPDR-018-L  Left Side 40/60 Rudder Control Horn (Brass shear pin on bottom)


Puts the control arm on the right side of the rudder blade when the rudder is positioned on the left side of the transom

 Ideal prop for surface drive monos with 7.5cc to 10cc motors using high nitro and for 7.5cc cats. Octura BeCu drive dog prop 1.4 x 1.97 diam = 2.76" pitch. 3/16" bore

OCFHE6MM18 6mm plain coupling to .187 cable for use on gearboxes & motors with 6mm output shafts"

.130 right hand cable into a 4mm Octura s/s stub, stepped down to 1/8"
. Uses Octura high quality cable

Stainless steel thin walled 3/16" OD.  tubing with a 3.2mm bore. Ideal for water tubing. Do away with long lengths of silicon tubing flapping around in the hull. Simply fix into the hull and bend where needed and then join to shorter silicon tubing. Never needs replacing

CMB High temperature 22mm ID exhaust coupler

OCFH5MM15. Threaded 5mm coupling to .150" (3.8mm) flexi cable for use with the .12 to .18 Glow engines."

Aluminium CNC double sided tiller arm with securing grub screw, fits 5mm and 3/16" shaft 

SPEEDMASTER stainless steel 3 part coupling 6mm plain to .187" (3/16")

SPDR-018-R Right-Side 40/60 Rudder Control Horn (Brass shear pin on bottom) 

Puts the control arm on the left side of the rudder blade when the rudder is positioned on the right side of the transom

Suitable for high torque 7.5cc motors. Ideal for 10-11cc monos semi and surface
This prop is now also avalable in right hand

Octura hardened steel 2 part coupling for 6mm motor shaft to 1/4" cable

OCTURA hardened steel 2 part coupling for 6mm threaded motor shaft to 3/16" flexi cable

14" Flexi shaft with 3.8mm (.150") left hand lay cable into 2.5" x 4mm s/s stub shaft. Normal rotation.

Genuine Tygon petrol fuel tubing which stays flexible, 3.2mm bore

Exhaust header viton "O" rings

This cast BeCu strut from Octura is designed for use with fast electrics but is also very suitable for the .10, .12 etc motors, and could be considered for, 3.5cc motors.
It comes with 3/16" bearings fitted and a nose piece into which .130" teflon fits.

65mm diam. Silicon bronze prop

Nylon double sided tiller arm with bore for 3/16" to 5mm shafts