Our products

This is the exploded view of the standard profiled mono, cat & hydro strut for use with IC motors from 3.5cc up to 11cc. Fitted with nose piece, reducer and 3/16" lead teflon sleave bearings. Unit comes assembled.
Blade depth 3.75", width 1.25"


"

We are the main importer of OCTURA propellers and hardware in the UK. We carry a full range of X4, X6, Y5, M4, M5, M6, N9, 12, 13, 14, 16, 17, 18, 19, V9, 21, & X5 series and a few of the odd series, OCTURA. propellers for both Electrics & I.C. motors.


With over 185 different sizes & profiles it is to much to list every one of them. We also carry the full range of Glass Filled Plastic and nylon props.



Please do not hesitate to phone us with your enquiry for any size or other products that we carry
Prices are from £1.35 up to £34.65.


OCTURA" IS A REGISTERED TRADE MARK"

Stainless steel prop for mono/cat .61-.67 engines. Comparable to Octura X452

SPDUM-002-O 7.5cc to 15cc Universal Offset Mount for monos where you need to get the engine as low as possible.

 A good prop for high torque 3.5cc motors. and electrics with 36/40mm cans.and electrics with 36/40mm cans.
This prop is now also available in right hand rotation for twin drive applications"
Equivalent prop. = Prather P220

OCFH4MM15 hardened plated steel flexi coupling for connecting a motor with a 4mm smooth shaft to .150 (3.6mm) flexi cable."

Male & Female underwater U/J comprising of OC610F & OC610M units for coupling 3/16" to 3/16" shafts. Couplings are made from hardened plated steel with one grub screw in each

Female underwater u/j for joining 3/16" bore shaft from the engine to a 3/16" prop stub shaft. Plated hardened steel with one grub screw."

Male underwater U/j for connecting to a 1/4" prop stub shaft. Made from plated hardened steel with two securing grub screws.

Male underwater universal joint for connecting to 3/16" prop stub shaft. Plated hardend stell with two grub screws

Octura hardened male U/J joint with 3/16" bore and one fixing grub screw

Engine mount rubbers 5/8" x 5/8" for Octura & Aeromarine mounts with 1/4"-20 threads male & female ends

£3.25 each"

Octura .098" flexi cable joined to a 2" x 1/8" s/s stub shaft.

OCSW, This very efficient OCTURA streamlined water pick up, machined from brass is best positioned near to the keel and close to the transom

BHHanson 90 degree Aluminum header,  with 2" elbow offset..

The standard profiled alluminun strut blade for engines from 3.5cc up to 26cc including petrol powered craft. Fitted with nose piece, reducer & 1/4" lead teflon sleeve bearings.
Blade depth 3.75", width 1.25"

"D" section radio box closed cell sealing foam. Stick down with cyno glue

Mocom 2127 Ali prop 53mm x 75mm pitch, suitable for 15cc engines

60/90 Wedge rudder with angle bracket and twin water pickup and tapered 6" blade. with 2.25" angle bracket.

OCTURA 5mm plain motor shaft to .078" (2mm) wire drive

15" OAL. x .130" (3.2mm); flexi cable joined to a 4mm s/s stub shaft, stepped down to 1/8" Cable is silver soldered to stub. Uses Octura high quality cable

 Transom mounted adjustable water pick up. 4mm 

 Transom mounted water pick up 6mm

CMB 45RS 7.3mm crankpin

Neoprene self adhesive closed cell sealing foam to seal screw down radio box lids etc.. 5mm x 12mm x 950mm long.

Mocom 2227 prop. 52mm x 74mm suitable for 15cc engines

Surface drive hydro strut with flat bottom complete nose piece & reducer to take sleave bearings.
State wether 1/4" or 3/16" bearings required when ordering