Our products

Home » All Products
« Previous \| ...10 \| 11 \| 12 \| 13 \| 14 \| 15 \| 16 \| 17 \| 18 \| 19 \| 20... \| Next »
	CMB "C6C" Turbo medium plug
	This CMB med/cold turbo plug is good for nitro fuel from 16% up to 30%
	Price: £8.95	Out of Stock

	C94106 Water jacket "O" rings

	Price: £5.48

	19/20mm MANIFOLD W/c Cooling ring	Details
	Water cooled ring to fit CMB 67 Header or any 19-20mm OD. manifold. Comes complete with 2 heat resistant O" rings and brass water nipples."
	Price: £19.85	Out of Stock

	H- 7	Details
	Another good .21 Hydro prop, 47.5mm (1.87) x 72mm (2.95" cupped)"
	Price: £24.95

	OCTURA OC64PKGPS S/s stepped stub shaft 3/16" to 1/8"	Details
	Octura stainless steel 3/16" O.D. x 2.25" long stub shaft down to 1/8" threaded 5-40. Can be bored to take .062" .130" .150" flexi cable.
	Price: £6.95

	P225S	Details
	Stainless steel prop. Comparable to the Octura X445
	Price: £22.95	Out of Stock

	40mm Standard red nylon prop 5mm	Details
	40mm standard red nylon prop 5mm thread
	Price: £0.75

	Prop shaft 16" S/steel 5mm	Details
	16" x 5mm stainless steel prop shaft & 8mm tube
	Price: £25.95	Out of Stock

	S1420SKST Speedmaster Skeg Strut assembly	Details
	Speedmaster/ high quality skeg strut assembly with mounting bracket. Required bearings to be fitted
	Price: £39.95

	SCALE DRIVER 2" A resin half body, full helmet, scale driver	Details
	Resin half body, full helmet, 2" tall. available red, yellow, black or clear resin. Ideal for hulls such as the 50" Apache & the Warhawk. Drivers can be shortened before moulding if required. Comes with 4mm moulded in s/s bolt & nut.
	Price: £4.95	Out of Stock

	SPD150 Speedmaster S/s tabs 1.5" x 1.5" (2)
	Speedmaster stainless steel S/s 1.5" x 1.5" with back plate 5/8" high.
	Price: £12.95	Out of Stock

	SPDR-010-40 - .40 Rudder Blade ONLY	Details
	SPDR-010-40 .40 Tapered wedge rudder blade ONLY
	Price: £24.95

	SPDR-010-40-LB 40/60 wedge rudder, single pickup	Details
	A high quality CNC wedge rudder with angle bracket and integral water pick up. Suitable for use on 6.5cc to 13cc models, mono, cat or riggers. Transom to leading edge of rudder 2.25" Blade length 5" wedge rudder suitable for 30" - 46" hulls.
	Price: £42.95	Out of Stock

	SPDS-017-SK Small Skeg Strut only	Details
	Speedmaster high quality ali strut with skeg, suitable for 3.5 to 7.5cc set ups. and fast electrics Needs to be fitted with 3/16" brass bushing bearing @ £6.95
	Price: £26.95	Out of Stock

	Wire drive (.062") 1/16" into 3/16" stub	Details
	Wire drive .062" to 2.5" x 3/16" stub shaft. Shaft made to individual lengths. State when ordering.
	Price: £14.95

	WATER OUTLETS Ali. 4mm bore	Details
	Large 4mm bore water outlet for use with 4 to 5mm ID. tubing
	Price: £2.95

	OCTURA Wedge Rudder Blade	Details
	WRBOLO Octura extruded ali wedge rudder blade with water pick up on the right. 6.3/8 long"
	Price: £12.95

	BHHANSON ZENOAH G340PUM Marine	Details
	NEW BH Hanson Pro Mod 340 PUM Zenoah 34cc with 2.0mm stroker crank, lightened piston, modified exhaust and intake port and timing, compression increase, head modification, modified Carb.
	Price: £669.00

	SPDR-002-21 Rudder blade	Details
	Speedmaster .21 rudder blade
	Price: £23.95

	1957 Hydro-rigger prop	Details
	Good 13cc - 15cc rigger/hydro prop. 57mm diam. x 4.26 pitch"
	Price: £30.95

	Octura M645, pitch 2.83"
	A modified X645 which has had the ears reduced and profiled. This helps to unload the prop, giving more revs than the full bladed X6 prop. The ideal prop if your X645 has too much loading, and an X642 is too small, then replace it with the M645 and have that faster excelleration and top end speed."
	Price: £28.98

	OcturaÂ® X437/3 Becu. pitch 2.07"	Details
	The ideal prop for 3.5cc outboards. Also good on 3.5cc monos and cats and electrics
	Price: £30.95

	OCTURAÂ® X646/3	Details
	OUT OF STOCK AT OCTURA The X646/3 prop is an ideal prop for use with a 7.5cc engine on most types of hull. the prop has slightly more lift than the X447/3 and 1.6:1 pitch as against the 1.4:1 of the X4 series.
	Price: £34.95

	OCTURA-OC4D Drive dog .125" bore (1/8") x 1/4" OD.	Details
	OCTURA small brass drive dog for use wth the 1/8" bore propellers. 1/4" OD. x 1/8" ID.
	Price: £3.25

	OCTURA HD Flexi Cable 3/16" (.187")	Details
	NEW Brass coloured stiffer HD Octura flexi cable 3/16" diam. (per foot) Also available in right hand winding"
	Price: £4.25

	Rubber Bobbin Coupling 5/16"unf to 5mm plain	Details
	Bobbin type coupling with hexaganal brass or Dural Aluminum ends for engine to solid shaft. Using 20mm x 15mm bobbin If you do not see the coupling size specified them please state when ordering. ie, 8mm to 1/4 plain or 8mm to 5mm plain or threaded."
	Price: £22.95

	5mm Brass nipples (each)	Details
	Brass water/fuel nipples with 5mm thread.
	Price: £1.00

	AEROMARINE CMB 67 ENGINE MOUNTS	Details
	Aeromarine Engine Mount These Quiet Mounts from Aeromarine come pre-drilled to fit most engines and to fit between 5in. or 4in. bearers. The mount shown is the CMB 67-80 mount. Please state your engine when ordering as each mount is calibrated for its specific engine. CMB 21 CMB 45 CMB 45RS CMB 67-80 CMB 90-101 OPS 21 OPS 45 S 6OP7-80 OPS 90 OS 45 OS 67 OS 90 PICCO 21 PICCO 45 PICCO 67 PICCO 90
	Price: £54.95	Out of Stock

	Ali. Water bulkhead fitting, 3.5mm bore	Details
	Large bore 3.5mm aluminum bulkhead water/fuel fitting.
	Price: £2.95	Out of Stock

	2714-10-50(2) CLLCleaver	Details
	Heat racing hydro prop. 2.7 dia. x 3.78" pitch. A good prop for 15cc glow & 26cc petrol
	Price: £26.95	Out of Stock

« Previous \| ...10 \| 11 \| 12 \| 13 \| 14 \| 15 \| 16 \| 17 \| 18 \| 19 \| 20... \| Next »

Home

Products