Our products

ABC Chopper2314-15-65(3) CPL heat racing prop. 2.3 dia x 3.22" pitch. 15deg. rake."

A good Hydro racing prop for strong .21 engines. 45.5mm (1.79") x 71mm (2.9" cupped) A good replacement for an Octura 1450

The famous OCTURA wedge rudder. Ideal for all size craft from 7.5cc up to 35cc. The rudder comes with two polycarbonate tiller arms, a pivot block, or a "T" bracket for transom mounting and has a large bore integral water pick up machined in the blade.

TO CLEAR
Silicon bronze prop 45mm diam.

Equivalent OCTURA prop  X445

14" x 5mm stainless steel prop shaft & 8mm S/steel tube

A resin half body, full helmet, scale driver, 2.5" to 3" high. Clear or grey. Suits the larger hulls like the Giant Apache & CUV Shead hulls. Drivers can be moulded shorter if required. 2.0" is ideal. Moulded in 5mm Bolt & nut."

SPEEDMASTER high quality Stainless steel trim plates 1" W x 1.5"L.
Ali bracket has single adjusting scew, all s/s nuts and bolts supplied
Pack of 4

We can split and sell as a pair if required at £11.25

Stainless steel 4mm stubshaft,  threaded for 15mm and bored to take .130 cable.
Can also be bored to take .150" cable. Joining has to be done by silver soldering only for the .150 cable after the cable has been modified. Not a job for the inexperienced.

Longer or shorter lengths can also be supplied. State when ordering

Red nylon X52.5 with 5mm thread

.<
ZENOAH 320PUM; . This latest engine has a new crankshaft/connecting rod combination, two bearings on the flywheel side and a new output side seal. It is the latest upgraded version with the stronger crankshaft assembly. A very powerfull engine with everything you would expect from Zenoah. Engine is fitted with electonic ignition, a big bore 1048 carb and the EZ pullstart for easier starting

Great 11 - 13cc rigger/hydro surface prop. 55mm diam. x 4.12 pitch"

The largest of the M series 75mm (2.95") dia x 4.425" pitch, suitable for surface drive monos with 26cc plus and hydros and cats with 26cc plus power plants. A prop that fits well between the X472 & the X482.

 The largest of the X4 series with a 1/8" .125" bore"

 Good prop for 7.5cc surface drive monos and 3.5cc riggers. A higher lift prop than the X4 series with 1.6" pitch

Octura flexi cable 1/4" diam. per 12"  (305mm)

Heavy duty bobbin coupling 1/4unf to 1/4" plain using a 20mm x 20mm bobbin

High grade Stainless steel drive dog, 1/4" ID x 7/16" OD with 1 grub screw.

USED
Good condition. No longer required by myself

PT7 Saddle tank for glow fuel use only. 3.5litre capacity, 220mm wide x 305mm long.
Large capacity for the 15cc engines

Brass water nipples with 4mm thread

2 Aluminium  turn fins complete with mounting brackets and all s/s nuts and bolts. For fast electrics and small IC. monos

The largest Aeromarine cat suitable for engines 15cc up to 35cc. Hull length overall: 50" Beam: 16.5" UK delivery charge £28.00

<strong>IN STOCK</strong>
The latest Cat hull from Aeromarine specially designed to take 26cc petrol engines such as Zenoah's, Quickdraw & RCMK type engines. If you want stability and speed this is the hull for you. Length 43.5" (1.1049m) Beam 16" (40.64cm) Engines size 15cc to 30cc.
Our newest CAT! A modification of the popular Avenger Hull, offers complete stability for those heavily modified engines and extra intakes for maximum ventilation. More deck downforce, lower cross section, large engine bay, these are just some of the features on this Lion of a Cat! Made under licence in the UK.
For coloured hull add £30.00 UK delivery charge £35.00

Aeromarine engine mount pre drilled for OS46 motor to fit between 5" stringers

Pushrod quicklink clevis for soldering to 3mm rod.

 Aeromarine small stainlees steel turn fin suitable for hulls up to 43"

Large Aeromarine stainless steel turn fin 3.5" long for 36 + long hulls. A must to get you round those corners quicker."

AEROMARINE-OCTURA 3M Waterproof radio box tape for use with tape down lids. The best you can get. does not leave a sticky residue on removal. 

Heat racing prop 2.6dia. x 3.72" pitch. great 13- 15cc

Heat racing prop 2.6 x 4.26" pitch. good prop for 13-15cc

  30" x 1/4" (.250") high quality and strong flexi cable