Our products

A reverse rotation prop for twin drive set ups.

 

Smallest of the V9 series props.

High grade Stainless steel drive dog with 2 s/s grub screws, 3/16" bore x 3/8" OD. for props with a 3/8" od. hub.

Octura OCGCSS4 Stainless steel stepped 4mm to 1/8" stub shaft complete with drive dog, washer and brass tail nut. Can be fitted with .130" cable to make a complete flexi shaft.
Stub shaft only £3.95

Octura Right hand lay flexi cable 24" x .130"RH. for clockwise rotation of prop.

Electric motor coupling for 1/8" shaft to .150" (3.8mm) cable

Bobbin coupling 1/4"unf to 3/16" plain shaft

MMS 30" x 3/16" flexi shaft using heavy duty gold anodised cable and a 4.25" stainless steel stub shaft.

Aeromarine 6" ali rudder blade with integral water pickup

Aeromarine push and twist cowling locks. Secures your cockpit lid quickly and securely, positivly one on the best on the market. Packet of 2, will split if required.

NEW DESIGN ABC2115-17-45 2 blade cleaver prop

New series ABC bronze prop ABC 2117-19-38

New series ABC bronze prop ABC 2119-19-38

Aeromarine 30" x 3/16" flexi shaft. with case hardened stub shaft.

 A strong fibreglass moulded radio box. This one is designed for use in shallow hulls such as thesprintcatss, or where a low lying box is required.  Servos can be laid on their side and secured with our servo brackets. The box will take up to 3 standard size servos along with the receiver and battery and leave room. The box measures 4.65 x 7.5" internally and comes with a plexi glass lid which sits in a lip around the top internal edge.

CMB 67 Exhaust header, not water cooled. Available in 10deg. & 18deg. angle.

The latest CMB 21 Evo.4 engine
Available to order now. Price may vary depending on the current exchange rate for the Euro

CMB 21 4 thous. alloy head shim

"O" ring cowl locks

Dubro 40oz (2pint) fuel tank for petrol or glow fuels use

ABC hydro prop great for .21 hydros. 42.5mm x 66mm (2.6") with 2.9" cupping

Hatch fasteners, pull to release, push down to attach

Hatch fastening cowl locks, push down and turn to lock, turn to release. (2 pcs). (Chinese) A cheaper version of the Aeromarine cowl locks

The OCTURA V-90 mount is a well made and sturdy mount which gives excellent support for your 11 to 15cc engines crankcase. Your engine sits in a cradle which is then supported with side bearers and their noise suppression rubbers. The mount is made to fit between 5 bearers.
Engine pads need to be adjusted, drilled and tapped for engine being used. Picture shows both V90 & V65 units
The V-65 has now been discontinued by OCTURA

OS Turbo plug with medium to high heat range. This plug is ideal for use with engines using 25% nitro.

TO CLEAR
P220 in silicon bronze.
Was £22.95

Equivalent to OCTURA X442

10" x 5mm stainless steel prop shaft & 8mm tube

A strong fibreglass moulded radio box. This one is designed for use in shallow hulls such as cats, or where a low lying box is required.  Servos can be laid on their side and secured with our servo brackets. The box will take up to 3 standard size servos along with the receiver and battery and leave room. The box measures 4.65 x 6.5" internally and comes with a plexi glass lid which sits in a lip around the top internal edge.