Our products

Carb "O" ring set

Balancing & polishing 2 blade silicon bronze props from 40mm up to 82mm

Remote needle valve assembly also for 67 engine

Carburattor iso block teflon gasket set, prevents heat from the crankcase reaching the carb and upsetting the mixture.

Balance and Polish 3 blade props 35mm up to 50mm

Aluminum carb isolation block, comes complete with teflon gaskets. 230 to 300 engines
The use of the Ali block eliminates the distortion and leakage that occurs with the standard fibre block.

Balance & polish 3 blade props

CMB Ultra high temperature exhaust coupler

OCTURA OCGCSL s/s stub shaft 4mm stepped up to 3/16". A replacement shaft for any 4mm bearing struts such as the Graupner or Kyosho drives allowing a 3/16" bore prop to be used.<BR><BR><BR>  Can be fitted with .130" or .150" flexi cable.

OC4MM2187 Adapter 4mm to 3/16" shaft. Fits ont a 4mm shft to allow the use of props with a 3/16" bore

CMB 45 Exhaust manifold seal

Stainless steel  coupling 1/4"unf to 3/16" flexi cable, 

Crankcase to cylinder head gasket (blue)

Cylinder for 260PUM marine engine.

2 sets water jacket "O" rings

 Zenoah 320 water jacket "O" rings

Water jacket for 260PUM engine

CMB 45 Exhaust header retaining spring

Stainless steel 3 part collet coupling with 5/16" thread.

Crankcase gasket for G260PUM engine.

BHHANSON Genuine Zenoah 28.5cc top end Kit. Comes with Water jacket, Piston and ring, piston pin and clips, WP bearing, gasket and spark plug.

A high quality British CNC made S/steel two part flex cable coupling made from 306 s/s. The 4 prong jaws grip the cable and release once the locking nut is released, unlike many steel couplings where the prongs become compressed. Avalailable with or without the spigot. 8mm thread to 3/16" cable.

320 Crankcase gasket

320 Cylinder base gasket

320 5 piece gasket set gasket, cylinder, crankcase, exhaust, carb block

320 Crankshaft bearing

320 Crankshaft sealed bearing

Zenoah main bearing

Zenoah 260-300 Special double sealed bearing. Replaces the front oil seal to make a Zenoah motor into a 3 bearing crank