Our products

 Standard Zenoah crankshaft for 260 to 300 engines

3/16" x7/16" od. moly nylon washer

3/8" OD. thick walled heavy duty brass tubing for 1/4" flexi shafts where grease is used for cable lubrication.

OCTURA Moly nylon thrust washer 1/4" bore x 7/16" OD.

18" Teflon lined prop tube for 3/16" flexi shaft, stepped to fit into 1/4" ID.  strut nose piece. <BR><BR>  <BR>  <B> Any length made  </B>"

Brass prop tube with teflon liner for 1/4" flexi shafts, with insert for 5/16" ID. strut nose piece
.
18" with teflon and reducer for strut nose piece = £15.48
24"          "               "                "          "        "     = £20.64

Speedmaster stainless steel 3 part coupling, Threaded 5mm to 3/16 cable."

Ali T-BAR prop tube support brackets for supporting the prop tube between 5 stringers. Brass lubricating point for shaft lubrication.
Fits 11/32"  and 5/16" OD. prop tubes     (HF100)

T-BAR for 11/32" & 5/16" prop tube with oiler

NEW CNC machined aluminium COMPETITION T-Bar propshaft support with oil resovoir for lubricating the shaft. Fits between 5" rails and suitable for 1/4" flexishafts (11/32 or 5/16 tubes).. For supporting the tube in mono's etc. Each end is adjustable for length, oil resevoir inside.

BHHanson Piston stopper 12mm plug thread

SPEEDMASTER/AEROMARINE Coupling 1/4"unf to .150" cable (3.8mm)

Threaded 5mm to 3.8mm cable, for .12 to .18 motors

The NEW STS-250 , High quality Shaft Tube Seal & saver for 1/4" flex Shafts and 11/32" OD stuffing box tubes,
The latest product from Aeromarine. This unit fits onto an 11/32" prop tube. It consist of the body with an oiling nipple and a bearing for the flexi shaft carrier. There is then a carrier with a sealing "O" ring to prevent water from coming up the tube , this is held in place by a collar that is grub screwed to the cable an d pushed up against the rubber "O" ring in the carrier.

A copy of the Aeromarine shaft tube seal for 11/32" brass tube unit, almost identical.

Ali shaft saver for 1/4" flexi cable.

Speedmaster coupling 1/4"unf to .150" cable

Stainless steel coupling 1/4"unf to 3/16" flexi shaft

Stainless steel 3 part flexi coupling 1/4unf. to 1/4" (.250) cable

.SPECIAL OFFER.
 Speedmaster standard size collet coupling 8mm to 3/16" suits the CMB 67/80 flywheel, or any crank with a 8mm thread

Stainless steel Aeromarine large pattern flexi collet coupling for 8mm crank thread to a 1/4" flexi cable.
Fits CMB .91 to .101 engines to a 1/4" flexi shaft or any engine with an 8mm threaded crank.

SPEEDMASTER stainless steel couplings are made for most Marine Engines, They are a three part unit with a seperate coupling insert to fit flexi shafts of 3/16in. or 1/4in. diameter cable There is also an insert for 1/4in. square ended cable.
. Suitable for 65=90, CMB, Rossi & Picco engines

Pulley wheel & Collet coupling 1/4" for belt starting of Zenoah, Sikk, RCMK etc. Allows you to use a belt start and retain the pullstart

AEROMARINE OPS 45 stainless steel 3 part ccoupling 1/4unf-3/16"

Aeromarine stainless steel 6mm to 1/4" flexi coupling to suit OPS 65-80, or any 6mm crankshaft.

 MMS S/steel coupling 5mm plain shaft to 1/4" cable

Stainless steel flexi coupling 6mm to 3/16" as used on OPS 65/80

SPEEDMASTER S/steel coupling OPS90 10mm to 1/4" cable