Our products

14" Flexi shaft with 3.8mm (.150") left hand lay cable into 2.5" x 4mm s/s stub shaft. Normal rotation.

14" Flexi shaft with 3.8mm (.150") right hand lay cable into 2.5" x 4mm s/s stub shaft. Uses Octura high quality cable

This 15" flexi shaft is made using OCTURA .150" flexi cable silver soldered into a Stainless steel 3/16" stub shaft, which is turned down to 1/8" for use in a strut with 3/16" bearings, enabling the small OCTURA 1/8" bore props (27 to 35mm) to be used. We make the shafts to your required length. The shaft can also be fitted with .130" flexi cable if required.
Ideal for the OMRA "Z" class and fast Electrics where the small OCTURA props are required."

A 15" (380mm) O.A.L. flexi shaft using .150" right hand cable into a 2.25"  (56mm) x 3/16" stub shaft which has a 4mm thread.

Uses Octura high quality cable Standard shaft is 15"  (380mm) in length including 2.25" stub.
State shaft lengths when ordering if different from our standard length 

A 15" (overall length 380mm) flexi shaft using .150" (3.8mm) OCTURA flexi cable into a stainless steel 3/16" x 2.25" (64mm) stub.   Longer or shorter stubs can be fitted if required, please state when ordering also the length of cable.

Standard shaft is 15"  (380mm) in length including 2.25" stub.
State shaft lengths when ordering if different from our standard length 

15" Flexi Shaft with .150" (3.8mm) into  2.5" x 3/16"   Stub shaft with 4mm thread.
Longer or shorter lengths can also be supplied. State when ordering. Uses Octura high quality cable

14" Flexi shaft .150" cable into 5mm x 2.5" long stub shaft. Shafts can be made longer or shorter if required.

OC64PKGPS OCTURA stainless steel prop shaft, 3/16" x 2.25" long, turned down to 1/8" for use with either .130" or .150 cable running in a 3/16" bearing strut, enabling a 1/8" bore prop to be used.

OCTURA OCGCSL s/s stub shaft 4mm stepped up to 3/16". A replacement shaft for any 4mm bearing struts such as the Graupner or Kyosho drives allowing a 3/16" bore prop to be used.<BR><BR><BR>  Can be fitted with .130" or .150" flexi cable.

OCTURA brass connecting ferrule for connecting 3/16" cable to a 3/16" stub shaft

Octura brass connecting ferrule for connecting 1/4" cable to 3/16" stub shaft

OCTURA Brass connecting ferrule for connecting 1/4" cable to 1/4" stub shaft.
Cable has to be soldered to the ferrule which is then fitted to the stub shaft with 2 grub screws.

Brass connecting ferrule for 1/4" cable to 1/4" stub shaft. for squared cable.

OCTURA 1/8" lead Teflon sleeve bushing

2 sizes

4mm x 6mm OD.out of stock .
4mm x 5.5mm OD. State OD when ordering

Moly nylon thrust washer, 1/8" bore x 1/4" OD

Moly nylon thrust washer 3/16" ID x 5/16" OD for use with the 5/16" OD drive dog.

Octura 3/16" bore x 3/8" od. moly nylon thrust washer

3/8" OD. thick walled heavy duty brass tubing for 1/4" flexi shafts where grease is used for cable lubrication.

OCTURA Moly nylon thrust washer 1/4" bore x 7/16" OD.

18" Teflon lined prop tube for 3/16" flexi shaft, stepped to fit into 1/4" ID.  strut nose piece. <BR><BR>  <BR>  <B> Any length made  </B>"

Brass prop tube with teflon liner for 1/4" flexi shafts, with insert for 5/16" ID. strut nose piece
.
18" with teflon and reducer for strut nose piece = £15.48
24"          "               "                "          "        "     = £20.64

Ali T-BAR prop tube support brackets for supporting the prop tube between 5 stringers. Brass lubricating point for shaft lubrication.
Fits 11/32"  and 5/16" OD. prop tubes     (HF100)

T-BAR for 11/32" & 5/16" prop tube with oiler

NEW CNC machined aluminium COMPETITION T-Bar propshaft support with oil resovoir for lubricating the shaft. Fits between 5" rails and suitable for 1/4" flexishafts (11/32 or 5/16 tubes).. For supporting the tube in mono's etc. Each end is adjustable for length, oil resevoir inside.

The NEW STS-250 , High quality Shaft Tube Seal & saver for 1/4" flex Shafts and 11/32" OD stuffing box tubes,
The latest product from Aeromarine. This unit fits onto an 11/32" prop tube. It consist of the body with an oiling nipple and a bearing for the flexi shaft carrier. There is then a carrier with a sealing "O" ring to prevent water from coming up the tube , this is held in place by a collar that is grub screwed to the cable an d pushed up against the rubber "O" ring in the carrier.

A copy of the Aeromarine shaft tube seal for 11/32" brass tube unit, almost identical.